| Siemens
offers a comprehensive range of pre-designed steam
turbines up to 10 MW. These innovative but economical
machines have simple modular design which facilitates
optimization of performance for the required application.
For optimal configuration, we have different but
fully compatible design series to draw upon, enabling
us to match your needs as exactly as possible.
|
|
|
SST-010 Steam Turbine (up to 110 kW)
(formerly known as EPM = Expansion Power Module)
Description
The SST-010 is a compact turbogenerator designed
to expand natural gas in pressure regulating
stations as a direct driving turbine in pipe
installation.
Technical Data
Power output up to 110 kW
Gas pressure up to 70 bar(a) / 1,015 psi
Gas flow rates up to 15,000 m?/h / 530,000
ft/h
Turbine wheel diameter 400 mm / 15.75 in
Typical Dimensions
Length: 1.2 m / 4 ft
Width: 0.8 m / 2.6 ft
Height: 0.9 m / 3 ft
Features
Low-maintenance because of the simple design
Extremely failure safe
Quick-start compatible
Casing flanged directly into the gas turbine
ATEX approved
|
SST-010 Steam Turbine
(up to 110 kW) |
|
SST-050 (up to 750 kW)
(formerly known as AF oder BF series)
SST-050SST-050 The SST-050 is a single-stage,
backpressure steam turbine in which the flow
passes axially through the blading. It is mainly
used as a power source for pumps or fans and
especially as a stand-by unit with quick-start
capability.
Technical data
Power output up to 750 kW
Inlet pressure up to 101 bar (a) / 1,465
psi
Inlet temperature dry saturated steam up
to 500 ํC / 930 ํF
Speed acc. to driven machine
Exhaust pressure: back pressure up to 11
bar (a) / 160 psi
Typical dimensions
Length: 1 m / 3.3 ft
Width: 1 m / 3.3 ft
H?he: 1,3 m / 4.3 ft turbine only
Features
Low-maintenance because of the simple design
Extremely failure safe
Quick-start compatible
Turbine with integral oil supply
Meet requirements of API 611 / 612 (if overhung
design and integral gear is accepted)
ATEX version available
|
SST-050 (up to 750 kW) |
|
SST-060 Steam
Turbine (up to 6 MW)
(formerly known as AFA, CFA or CFR series)
Description The SST-060 stand out by rugged
design and renowned reliability even under the
most severe operating conditions. They are ideal
for saturated steam service. Their suitability
for use as condensation or back-pressure turbines
in combination with various integral gears modules
opens up a broad application range.
Technical Data
Power output up to 6 MW
Inlet pressure up to 131 bar(a) / 1,900 psi
Inlet temperature dry saturated steam up
to 530 ํC / 985 ํF
Speed acc. to driven machine
Exhaust pressure: back pressure up to 29
bar(a) / 420 psi or vacuum
Typical dimensions
Length: 1.5 m / 4.9 ft
Width: 2.5 m / 8.2 ft
Height: 2.5 m / 8.2 ft (turbine only)
Features
Backpressure or condensing type
Package unit design
Oil unit integrated in base frame
Nozzle group control valves available
Quick-start without pre-heating
Tailor made
Meet requirements of API 611 / 612 (if overhung
design and integral gear is accepted)
ATEX version available
Suitable for ORC (Organic Rankine Cycle)
Suitable for gas expansion
|
SST-060 Steam Turbine
(up to 6 MW) |
|
SST-110 Steam Turbine (up to 7 MW)
(formerly known as TWIN version)
Description The SST-110 provides highest cost
efficiency and high performance. It allows to
reduce high heat gradients while providing a
controlled extraction capability. The SST-110
is a dual casing turbine on one gearbox which
can run on different steam lines.
Technical data
Power output up to 7 MW
Inlet pressure up to 131 bar(a) / 1,900 psi
Inlet temperature dry saturated steam up
to 530 ํC / 985 ํF
Speed acc. to driven machine
Exhaust pressure: back pressure or vacuum
Typical dimensions
Length: approx. 6 m / 20 ft (incl. generator)
Width: 2.8 m / 9.2 ft
Height: 3.2 m / 10.5 ft
Features
Backpressure, extraction or condensing type
Package unit design
Oil unit integrated in base frame
Nozzle group control valves available
Quick-start without pre-heating
Extremely compact construction
Pressure controlled extraction
High pressure / low pressure applications
Meet requirements of API 611/612 (if overhung
and integral gear is accepted)
ATEX version available
Suitable for ORC (Organic Rankine Cycle)
Suitable for gas expansion
|
SST-110 Steam Turbine
(up to 7 MW) |
|
SST-120
Steam Turbine (up to 10 MW)
(formerly known as Tandem version)
Description The SST-120 is a multi casing turbine
consisting of different turbine modules on each
shaft end of the generator. These can be used
in parralel or serial steam flow arrangement.
Technical data
Power output up to 10 MW
Inlet pressure up to 131 bar(a) / 1,900 psi
Inlet temperature dry saturated steam up
to 530 ํC / 985 ํF
Speed acc. to driven machine
Exhaust pressure: back pressure or vacuum
Typical dimensions
Length approx. 9 m / 30 ft (incl. generator)
Width: 2.8 m / 9.2 ft
Height: 3.2 m / 10.5 ft
Features
Backpressure, extraction or condensing type
Package unit design
Oil unit integrated in base frame
Nozzle group control valves available
Quick-start without pre-heating
Extremely compact construction
Pressure controlled extraction
High pressure-/ low pressure applications
Meet requirements of API 611/612 (if overhung
design and integral gear is accepted)
ATEX version available
Suitable for ORC (Organic Rankine Cycle)
Suitable for gas expansion
|
SST-120 Steam Turbine
(up to 10 MW) |
| |
