400HZ Field Installable Connector
400 Hz Field Connectors
As always, J&B's aircraft connectors
feature:
High visibility or Thermgard ? Replacement
Contact Sections (noses)
Elastomer strain relief, absorbing the whipsaw
action utilized in insertion/withdrawal forces
Current rating of 300 Amps and voltage rating
of 600 VAC
Operating ambient temperature range of –40?F
to +130?F
Mates to Mil Spec MS90362 400 Hz receptacle
With J&B Aviation's newest Field Installable
Connector you can adjust the connection to meet
individual station or particular location needs.
This revolutionary new connector features two
LED indicators for “Power On” and “Power Available”
and has the capability to handle four push-button
switches to remotely operate the 400 Hz power
source and cable storage device (switch rating
600 VAC 3 Amps). Additionally, the connector's
plastic body housing provides for greater resistance
to abrasion from ramp surfaces. Although these
connectors are intended for field installation,
they can be installed on new cables or on your
existing cables at our repair facility.
Part Number - Description
JB5100 - Field Installable Connector Kit
with high visibility Replacement Contact Section
(yellow nose) for use with J&B 260 Amp (1.65”
diameter) Single Jacketed Cable. This kit does
not include switches nor LEDs.
JB5101 - Field Installable Connector Kit with
Thermgard ? temperature-sensitive Replacement
Contact Section (green nose) for use with J&B
260 Amp (1.65” diameter) Single Jacketed Cable.
This kit does not include switches nor LEDs.
JB5102 - Field Installable Connector Kit with
high visibility Replacement Contact Section
(yellow nose) for use with J&B 300 Amp (1.97”
diameter) Single Jacketed Cable. This kit does
not include switches nor LEDs.
JB5103 - Field Installable Connector Kit with
Thermgard ? temperature-sensitive Replacement
Contact Section (green nose) for use with J&B
300 Amp (1.97” diameter) Single Jacketed Cable.
This kit does not include switches nor LEDs.
JB5104 - Kit containing switches and LEDs
for installation into above connector kits.
